Drywall & Sheetrock Repair and Installation in Kansas City
A great paint job lives or dies on the wall underneath it. Ruiz Painting handles the full picture - hanging new sheetrock, patching holes, chasing down cracks and nail pops, repairing water damage, and finishing every surface smooth before a single drop of paint goes on. With 22 years of hands-on experience across the Kansas City metro, owner Martin Ruiz and his crew give you one point of contact for both the repair and the finish coat, so the seam disappears and the wall looks like it was never touched.
One Crew for the Wall and the Paint
Most homeowners run into the same headache: a drywall contractor patches the wall, then a separate painter shows up weeks later and the repair still shows through. Different hands, different standards, and a visible seam where the two never talked. Ruiz Painting solves that by doing both. We repair or install the sheetrock, finish it to a true paint-ready surface, and then prime and paint it ourselves - matching sheen, texture, and color so the fix vanishes into the wall.
This matters more than it sounds. Fresh drywall mud and old painted wall soak up paint differently, and a rushed repair will 'flash' - showing a dull or shiny patch under the right light no matter how carefully you paint over it. Because our crew controls the whole process, we prime the repair correctly, feather the texture into the surrounding area, and roll the finish coat wall-to-wall so there is no telltale rectangle where the damage used to be.
For Kansas City homeowners that means fewer trips, one estimate, one schedule, and one company standing behind the result. Whether it is a single ceiling stain in Prairie Village or a full basement build-out in Olathe, you are dealing with the same people from bare board to final coat.
Drywall and Sheetrock Services We Provide
New drywall and sheetrock installation and hanging - we measure, cut, and hang board for additions, finished basements, garage conversions, and remodels, cutting cleanly around outlets, windows, and fixtures so panels sit tight and flat.
Taping and mudding - we tape every joint, embed corner bead, and build up mud coats, sanding between passes so seams read flat under paint instead of telegraphing through.
Finishing to a paint-ready surface - the goal on every job is a smooth, uniform wall or ceiling that is genuinely ready for primer, not one that needs a second contractor to fix.
Patching holes - from doorknob dents and TV-mount cutouts to larger openings left by plumbers or electricians, we cut, back, patch, and blend so the repair disappears.
Repairing cracks and nail pops - hairline stress cracks over doorways and popped fasteners along studs get re-secured and refinished so they stay flat instead of coming back.
Water-damage and ceiling repair - we cut out compromised board, address the stained or sagging area, and rebuild the surface so a leak from an old roof or a burst pipe stops being the first thing guests notice.
Texture matching before paint - knockdown, orange peel, or a smooth wall, we blend new texture into the existing surface so a patch does not stand out against the rest of the room.
Understanding Drywall Finish Levels
Not all 'finished' drywall is finished to the same standard, and that is exactly why some walls look flawless and others show every seam once the sun hits them. Drywall is finished in levels, from bare board with nothing on it up to a fully smooth, uniform surface. For a quality paint job in a lived-in home, you want the higher end of that range: joints taped and coated, fasteners covered, corners crisp, and the whole surface sanded smooth and consistent so it takes primer and paint evenly.
The higher the sheen of your paint, the more the wall behind it shows. Flat and matte paints are forgiving and hide minor imperfections, while satin, semi-gloss, and gloss finishes act like a spotlight on any ridge, dimple, or under-sanded seam. That is why we finish more carefully when we know a wall is getting an eggshell or satin finish, and it is another reason having the same crew handle drywall and paint pays off - we prep to the standard the final finish actually demands.
When we walk a job, we tell you plainly what level of finish the surface needs for the look you want, rather than cutting a corner you will end up staring at every evening.
New Construction, Remodels, and Repairs
New construction and additions start from open studs, which is the cleanest scenario - we hang full sheets, tie the new work into existing framing, and finish everything to match the rest of the home. Finished basements and bonus rooms fall here too, where getting the board flat and the corners square from the start sets up a room that feels built, not patched.
Remodels are their own animal. Tying new drywall into decades-old plaster or existing sheetrock, working around removed walls, relocated doorways, and updated wiring - it takes patience to make new and old meet without a visible line. This is common in older Kansas City neighborhoods, from Brookside bungalows to homes around Mission and Roeland Park, where nothing is perfectly plumb and a good result comes from careful blending, not just new material.
Repairs are the calls we get most: a hole behind a door, a crack that keeps reappearing, a brown ring on the ceiling after a storm, nail pops marching up a hallway. These are smaller in scope but unforgiving in execution, because the repair sits inside a finished, painted room where any mismatch is obvious. Whatever the scale, we scope it honestly and only do the work the wall actually needs.
What Causes Drywall Damage in KC Homes
Settling is the quiet one. As a house shifts over the years, stress concentrates at the weakest points - the corners of doorways and windows - and cracks open up there again and again. A cosmetic patch that ignores the movement underneath will just crack a second time, so these get reinforced properly.
Moisture is the most damaging. Roof leaks, ice dams, overflowing gutters, plumbing failures, and Kansas City's humid summers all find their way into ceilings and walls, leaving stains, softening the board, and sometimes sagging it. Once drywall has been saturated it usually needs to come out - painting over a water stain without addressing the compromised board just hides the problem until it bleeds through again.
Impacts round out the list: doorknobs through hallway walls, furniture on the move, kids and pets, and the wear that comes with a busy household. These are straightforward to fix well when the patch is backed, blended, and textured to match - and easy to fix poorly when it is rushed. Knowing the cause tells us how to repair it so it lasts, not just how to make it look good for a month.
Clean Work and Real Dust Control
Sanding drywall is dusty work, and fine gypsum dust does not stay in one room if nobody manages it - it drifts through the house, settles on furniture, and gets into vents. We take that seriously. Our crew masks off doorways, protects floors and belongings, and uses dust-control methods while sanding so the mess stays contained to the work area instead of spreading through your home.
That respect for the space carries through the whole job. We keep the site tidy day to day, clean up before we leave, and treat your home like people actually live there - because they do. Add clear communication about the schedule and what to expect, plus premium primers and paints on the finish coats, and you get a repair that looks right and a house that does not feel like a construction zone while the work is underway.
Helpful Resources
The Ruiz Painting difference
Repair and Paint in One
We fix the wall and finish it ourselves, so the patch disappears into the paint instead of showing through weeks later. One crew, one standard, no finger-pointing between contractors.
Seamless, Paint-Ready Finishing
Taped, mudded, and sanded to a genuinely smooth surface - not a rough patch handed off for someone else to fix. Prep this careful is why the final coat looks flawless.
22 Years of Metro Experience
Two decades finishing drywall in Kansas City's mix of old plaster and new construction means we know how to make new work meet old without a visible line.
Honest Scope, Free Estimates
We tell you what the wall actually needs and give you a free, no-obligation estimate. No upselling to a full replacement when a proper repair will hold.
Dust Kept Under Control
Doorways masked, floors covered, and sanding dust contained to the work area so the rest of your home stays livable while we work.
Bilingual, Licensed, and Insured
Se habla espanol. Fully licensed and insured, with clear communication in English or Spanish from the first estimate to the final walkthrough.
Our drywall & sheetrock process
Free Estimate and Assessment
We walk the job, find the real cause of the damage - settling, moisture, or impact - and give you a clear, no-obligation estimate for the repair or installation and the paint.
Protect and Prep
We mask off adjacent rooms, cover floors and furniture, and set up dust control before any cutting or sanding begins.
Install or Repair
We hang new sheetrock or cut out and back the damaged area, then tape, mud, and build up coats for a solid, flat foundation.
Finish and Texture Match
We sand to a smooth, paint-ready surface and blend any texture - knockdown, orange peel, or smooth - into the surrounding wall or ceiling.
Prime, Paint, and Clean Up
We prime the repair, roll on premium paint so the fix vanishes, then clean the site and walk it with you before we call it done.
Drywall & Sheetrock FAQs
Questions about your project? Call (913) 206-1862 — we're happy to help in English or Spanish.
Can you both repair my drywall and paint it?
Yes - that is the whole point of how we work. The same crew repairs or installs the sheetrock, finishes it smooth, primes it, and paints it. Because we control both steps, the repair blends into the surrounding wall instead of showing through as a patch, which is the number one problem when a separate drywaller and painter never coordinate.
Will the patch or new drywall be visible after you paint?
Done right, no. The keys are finishing the surface smooth, matching the existing texture, priming the repair so it does not flash, and painting the finish coat across the whole wall rather than spot-painting just the patch. That combination is exactly why having one crew handle drywall and paint together produces a seam you cannot find.
My ceiling has a water stain - can I just paint over it?
Not reliably. If the leak is fixed but the board is still sound, a proper stain-blocking primer can seal it before paint. But if the drywall got saturated and is soft, sagging, or crumbling, painting over it only hides the problem until it bleeds or fails again. We assess the board first and cut out and replace what is compromised so the repair actually lasts.
What causes nail pops and cracks to keep coming back?
Usually house movement. As a home settles, stress gathers at doorway and window corners and along studs, popping fasteners and reopening cracks. A cosmetic skim that ignores that movement will fail again. We re-secure and reinforce these spots so they stay flat, then refinish and paint so the repair holds.
How do you keep drywall dust out of the rest of my house?
We mask off doorways, cover floors and furniture, and use dust-control methods while sanding so the fine gypsum dust stays in the work area. We also clean up at the end so you are not left with a dusty house. Keeping a tidy, contained job site is part of how we work on every project.
Do you handle new construction and finished basements, not just repairs?
Yes. We hang and finish new sheetrock for additions, finished basements, garage conversions, and remodels across the Kansas City metro - and we tie new drywall into existing walls and older plaster, which is common in KC's established neighborhoods. From bare studs to a painted, finished room, we handle the whole scope.
Which areas do you serve for drywall and sheetrock work?
The whole Kansas City metro on both sides of the state line - Kansas City KS, Kansas City MO, Overland Park, Olathe, Lenexa, Shawnee, Leawood, Prairie Village, Mission, Lee's Summit, Independence, Blue Springs, Liberty, and nearby communities. Call (913) 206-1862 for a free estimate.
Related services
Ready to transform your space with color?
Get a free, no-pressure quote from a bilingual team with 22 years of experience across the Kansas City metro.